15H11MF (EP369)

turbine blades, forging, bandages and other items, long operating at temperatures up to 560 ° C.; scaling temperature of 750 ° C .; martensitic steel grade

Classification

Country Section Category
CIS, Russia, Ukraine Heat resistant steels and alloys Heat resistant high alloy steel

Chemical composition

Standard Fe, % Si, % Mn, % Cr, % Cu, % Ni, % V, % P, % C, % S, % Mo, %
GOST 5632-72 84.955–89.03 < 0.5 < 0.7 10–11.5 < 0.3 < 0.6 0.25–0.4 < 0.03 0.12–0.19 < 0.025 0.6–0.8

Information on suppliers

Physical characteristics

Temperature, °C $$E\cdot 10^{9}$$, $$MPa$$ $$\alpha\cdot 10^{6}$$, $$K^{-1}$$ $$\varkappa$$, $$\frac{W}{m\cdot K}$$ $$\rho$$, $$\frac{kg}{m^3}$$ $$c\cdot 10^{-3}$$, $$\frac{J}{kg\cdot K}$$
20 228 7850
100 222 10.3 0.5
200 213 10.6 24.4 0.525
300 205 10.8 26.1 0.567
400 193 11.3 27.2 0.63
500 180 11.7 27.6 0.7
600 12 28 0.8
700 12.2
800 12.4

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ $$\sigma_{P}$$, $$MPa$$ $$\epsilon_L$$, % $$\psi$$, % $$KCU\cdot 10^{3}$$, $$\frac{J}{m^2}$$ Treatment
Rod GOST 5949-75 690 490 15 55 590 Hardening of 1030-1060 ° C, oil quenching 700-740 ° C, oil
Rod GOST 18968-73 740 590–755 15 50 590 Normalized and tempered

Brinell hardness number

Rolling Standard Classifiers Value, HBW
Rod GOST 5949-75 annealing 229
Rod GOST 18968-73 normalization, average vacation 229–269

Technological Properties

Weldability
Difficult to weld

Critical point temperatures

Ac3(Acm), K
880

Standards

Standard Description
GOST 5632-72

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mn % Manganese
Cr % Chrome
Cu % Copper
Ni % Nickel
V % Vanadium
P % Phosphorus
C % Carbon
S % Sulfur
Mo % Molybdenum

Description of physical characteristics

Parameter Units of measurement Description
$$E\cdot 10^{9}$$ $$MPa$$ Elastic modulus
$$\alpha\cdot 10^{6}$$ $$K^{-1}$$ Coefficient of thermal (linear) expansion (range 20°C–T)
$$\varkappa$$ $$\frac{W}{m\cdot K}$$ Coefficient of thermal conductivity (the heat capacity of the material)
$$\rho$$ $$\frac{kg}{m^3}$$ The density of the material
$$c\cdot 10^{-3}$$ $$\frac{J}{kg\cdot K}$$ The specific heat of the material (range 20°C–T)

Description of mechanical properties

Parameter Units of measurement Description
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength
$$\sigma_{P}$$ $$MPa$$ Proportionality limit
$$\epsilon_L$$ % Elongation at break (longitudinal)
$$\psi$$ % Reduction in cross section on fracture
$$KCU\cdot 10^{3}$$ $$\frac{J}{m^2}$$ Impact toughness

Designation of types of weldability

Parameter Units of measurement Description
no limits Welding is performed without heating and without subsequent heat treatment
Boundedly welded Welding is possible with heating up to 100–120 °C and subsequent heat treatment
Difficult to weld For obtaining quality welded joints, additional operations are required: heating up to 200–300 °C for welding, heat treatment after welding — annealing
Not applicable for welded structures

Description of temperatures of critical points

Parameter Units of measurement Description
Ac3(Acm) K