Alloy 32N6HYU (Alloy EP974)
No foreign analogues
It is used for the manufacture of resistors and strain gages.
No foreign analogues
It is used for the manufacture of resistors and strain gages.
Standard | Fe, % | Si, % | Mn, % | Cr, % | Ni, % | Al, % | P, % | C, % | S, % |
---|---|---|---|---|---|---|---|---|---|
Standard | Fe, % | Si, % | Mn, % | Cr, % | Ni, % | Al, % | P, % | C, % | S, % |
GOST 10994-74 | 58.21–62.2 | 0.2–0.4 | 0.2–0.4 | 5.5–6.5 | 31–33 | 0.9–1.4 | < 0.02 | < 0.05 | < 0.02 |
Temperature, °C | $$E\cdot 10^{9}$$, $$MPa$$ | $$\alpha\cdot 10^{6}$$, $$K^{-1}$$ | $$\rho$$, $$\frac{kg}{m^3}$$ | $$R\cdot 10^{-6}$$, $$\Omega\cdot m$$ |
---|---|---|---|---|
Temperature, °C | $$E\cdot 10^{9}$$, $$MPa$$ | $$\alpha\cdot 10^{6}$$, $$K^{-1}$$ | $$\rho$$, $$\frac{kg}{m^3}$$ | $$R\cdot 10^{-6}$$, $$\Omega\cdot m$$ |
20 | 200 | > 4.5 | 800 | 1.3–1.5 |
Rolling | Standard | Size, mm | Tension | Classifiers | $$\sigma _{U}$$, $$MPa$$ | $$\sigma_{Y}$$, $$MPa$$ | d5, % | Treatment |
---|---|---|---|---|---|---|---|---|
Rolling | Standard | Size, mm | Tension | Classifiers | $$\sigma _{U}$$, $$MPa$$ | $$\sigma_{Y}$$, $$MPa$$ | d5, % | Treatment |
Wire | GOST 492-2006 | 10 | Transverse | 850–1000 | 350–400 | 18–20 |
Rolling | Standard | Classifiers | Value, HBW |
---|---|---|---|
Rolling | Standard | Classifiers | Value, HBW |
Wire | GOST 492-2006 | 160–190 |
Standard | Температура, °C |
---|---|
Standard | Температура, °C |
GOST 492-2006 | < 400 |
Standard | Description |
---|---|
Standard | Description |
GOST 10994-74 |
Parameter | Units of measurement | Description |
---|---|---|
Parameter | Units of measurement | Description |
$$E\cdot 10^{9}$$ | $$MPa$$ | Elastic modulus |
$$\alpha\cdot 10^{6}$$ | $$K^{-1}$$ | Coefficient of thermal (linear) expansion (range 20°C–T) |
$$\rho$$ | $$\frac{kg}{m^3}$$ | The density of the material |
$$R\cdot 10^{-6}$$ | $$\Omega\cdot m$$ | Electrical resistivity |