AMg6L (AL23)

for the production of shaped castings; corrosion-resistant alloy

Classification

Country	Section	Category
Country	Section	Category
CIS, Russia, Ukraine	Aluminum, aluminum alloys	Foundry aluminum alloys

Chemical composition

Standard	Fe, %	Si, %	Be, %	Mg, %	Mn, %	Ti, %	Cu, %	Zn, %	Zr, %	Al, %
Standard	Fe, %	Si, %	Be, %	Mg, %	Mn, %	Ti, %	Cu, %	Zn, %	Zr, %	Al, %
GOST 1583-93	< 0.2	< 0.2	0.02–0.1	6–7	< 0.1	0.05–0.15	< 0.15	< 0.1	0.05–0.2	91.8–93.88

Information on suppliers

Wish to advertise here?

Physical characteristics

Temperature, °C	$\alpha\cdot 10^{6}$ , $K^{-1}$
Temperature, °C	$\alpha\cdot 10^{6}$ , $K^{-1}$
20	24.5

Mechanical properties at 20 °C

Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	d5, %	Treatment
Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	d5, %	Treatment
Castings	GOST 1583-93				186–225	4–6

Brinell hardness number

Rolling	Standard	Classifiers	Value, HBW
Rolling	Standard	Classifiers	Value, HBW
Alloy cast	GOST 1583-93		60

Casting and technological parameters

linear shrinkage, %
linear shrinkage, %
1.1

Analogues

USA	Germany
USA	Germany
518	EN AC-51200

Standards

Standard	Description
Standard	Description
GOST 1583-93
GOST Р 55375-2012
DSTU 2839-94

Description of chemical elements

Element	Units of measurement	Description
Element	Units of measurement	Description
Fe	%	Iron
Si	%	Silicon
Be	%	Beryllium
Mg	%	Magnesium
Mn	%	Manganese
Ti	%	Titan
Cu	%	Copper
Zn	%	Zinc
Zr	%	Zirconium
Al	%	Aluminium

Description of physical characteristics

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$\alpha\cdot 10^{6}$	$K^{-1}$	Coefficient of thermal (linear) expansion (range 20°C–T)

Description of mechanical properties

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
d5	%	Elongation at break
$\sigma _{U}$	$MPa$	Ultimate tensile strength

Description of the casting and technological parameters

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
linear shrinkage	%	The difference between model dimensions and the model casting