ATs4Mg (AL24)

for the production of shaped castings; corrosion-resistant alloy

Classification

Country Section Category
CIS, Russia, Ukraine Aluminum, aluminum alloys Foundry aluminum alloys

Chemical composition

Standard Fe, % Si, % Be, % Mg, % Mn, % Ti, % Cu, % Zn, % Zr, % Al, %
GOST 1583-93 < 0.5 < 0.3 < 0.1 1.5–2 0.2–0.5 0.1–0.2 < 0.2 3.5–4.5 < 0.1 91.6–94.7

Information on suppliers

Physical characteristics

Temperature, °C $$E\cdot 10^{9}$$, $$MPa$$ $$\alpha\cdot 10^{6}$$, $$K^{-1}$$ $$\rho$$, $$\frac{kg}{m^3}$$ $$R\cdot 10^{-6}$$, $$\Omega\cdot m$$
20 0.69 2740 67
100 23.2

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ d5, % Treatment
Castings GOST 1583-93 216–265 2

Brinell hardness number

Rolling Standard Classifiers Value, HBW
Castings GOST 1583-93 60–70

Casting and technological parameters

linear shrinkage, %
1.2

Analogues

USA
312

Standards

Standard Description
GOST 1583-93

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Be % Beryllium
Mg % Magnesium
Mn % Manganese
Ti % Titan
Cu % Copper
Zn % Zinc
Zr % Zirconium
Al % Aluminium

Description of physical characteristics

Parameter Units of measurement Description
$$E\cdot 10^{9}$$ $$MPa$$ Elastic modulus
$$\alpha\cdot 10^{6}$$ $$K^{-1}$$ Coefficient of thermal (linear) expansion (range 20°C–T)
$$\rho$$ $$\frac{kg}{m^3}$$ The density of the material
$$R\cdot 10^{-6}$$ $$\Omega\cdot m$$ Electrical resistivity

Description of mechanical properties

Parameter Units of measurement Description
d5 % Elongation at break
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength

Description of the casting and technological parameters

Parameter Units of measurement Description
linear shrinkage % The difference between model dimensions and the model casting