MN19

cladding material for medical instruments, precision mechanics; Alloy badly deformed cold, well welded, corrosion-resistant.

Classification

Country Section Category
CIS, Russia, Ukraine Copper, copper alloys Copper-Nickel Alloys

Chemical composition

Standard Fe, % Si, % Mg, % Bi, % Mn, % Cu, % Zn, % Sb, % Pb, % As, % P, % C, % S, % Ni + Co, %
GOST 492-2006 < 0.5 < 0.15 < 0.05 < 0.002 < 0.3 78.5–82 < 0.3 < 0.005 < 0.005 < 0.01 < 0.01 < 0.05 < 0.01 18–20

Information on suppliers

Physical characteristics

Temperature, °C $$E\cdot 10^{9}$$, $$MPa$$ $$\alpha\cdot 10^{6}$$, $$K^{-1}$$ $$\varkappa$$, $$\frac{W}{m\cdot K}$$ $$\rho$$, $$\frac{kg}{m^3}$$ $$R\cdot 10^{-6}$$, $$\Omega\cdot m$$
20 140 16 38.5 8900 0.287

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ $$\epsilon_L$$, % Treatment
Tape softly. GOST 5187-2003 290 22–25
The tape is hard. GOST 5187-2003 390 2.5
The band is soft. GOST 5063-73 290 30
The strip is hard. GOST 5063-73 390 3

Brinell hardness number

Rolling Standard Classifiers Value, HBW
The alloy is soft 690
Alloy hard 1170

Casting and technological parameters

melting point, °C Hot working temperature, °C annealing temperature, °C
1190 900–1030 600–780

Analogues

USA
SB 111 (C71000)

Standards

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mg % Magnesium
Bi % Bismuth
Mn % Manganese
Cu % Copper
Zn % Zinc
Sb % Antimony
Pb % Lead
As % Arsenic
P % Phosphorus
C % Carbon
S % Sulfur
Ni + Co % Nickel + Cobalt

Description of physical characteristics

Parameter Units of measurement Description
$$E\cdot 10^{9}$$ $$MPa$$ Elastic modulus
$$\alpha\cdot 10^{6}$$ $$K^{-1}$$ Coefficient of thermal (linear) expansion (range 20°C–T)
$$\varkappa$$ $$\frac{W}{m\cdot K}$$ Coefficient of thermal conductivity (the heat capacity of the material)
$$\rho$$ $$\frac{kg}{m^3}$$ The density of the material
$$R\cdot 10^{-6}$$ $$\Omega\cdot m$$ Electrical resistivity

Description of mechanical properties

Parameter Units of measurement Description
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength
$$\epsilon_L$$ % Elongation at break (longitudinal)

Description of the casting and technological parameters

Parameter Units of measurement Description
melting point °C The temperature at which solid crystalline body makes the transition to the liquid state and Vice versa
Hot working temperature °C The temperature at which the plastic-deformed metal recrystallizes during the pressure treatment
annealing temperature °C The temperature at which the processes return recrystallization and homogenization of the metal to reduce its hardness for subsequent machining