SCH10

for the manufacture of castings

Classification

Country Section Category
CIS, Russia, Ukraine Cast iron Gray cast iron

Chemical composition

Standard Fe, % Si, % Mn, % P, % C, % S, %
GOST 1412-85 92.45–93.8 2.2–2.6 0.5–0.8 < 0.3 3.5–3.7 < 0.15

Information on suppliers

Wish to advertise here?

Physical characteristics

Temperature, °C $$E\cdot 10^{9}$$, $$MPa$$ $$\alpha\cdot 10^{6}$$, $$K^{-1}$$ $$\varkappa$$, $$\frac{W}{m\cdot K}$$ $$\rho$$, $$\frac{kg}{m^3}$$ $$c\cdot 10^{-3}$$, $$\frac{J}{kg\cdot K}$$
20 90 60 6800
100 8 0.46

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ Treatment
Casting GOST 1412-85 100

Brinell hardness number

Rolling Standard Classifiers Value, HBW
GOST 1412-85 120–205

Casting and technological parameters

linear shrinkage, %
1
SCH10 / Aloro

Standards

Standard Description
GOST 1412-85

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mn % Manganese
P % Phosphorus
C % Carbon
S % Sulfur

Description of physical characteristics

Parameter Units of measurement Description
$$E\cdot 10^{9}$$ $$MPa$$ Elastic modulus
$$\alpha\cdot 10^{6}$$ $$K^{-1}$$ Coefficient of thermal (linear) expansion (range 20°C–T)
$$\varkappa$$ $$\frac{W}{m\cdot K}$$ Coefficient of thermal conductivity (the heat capacity of the material)
$$\rho$$ $$\frac{kg}{m^3}$$ The density of the material
$$c\cdot 10^{-3}$$ $$\frac{J}{kg\cdot K}$$ The specific heat of the material (range 20°C–T)

Description of mechanical properties

Parameter Units of measurement Description
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength

Description of the casting and technological parameters

Parameter Units of measurement Description
linear shrinkage % The difference between model dimensions and the model casting