GI30

for the manufacture of castings

Classification

Country	Section	Category
Country	Section	Category
CIS, Russia, Ukraine	Cast iron	Gray cast iron

Chemical composition

Standard	Fe, %	Si, %	Mn, %	P, %	C, %	S, %
Standard	Fe, %	Si, %	Mn, %	P, %	C, %	S, %
GOST 1412-85	93.58–95	1.3–1.9	0.7–1	< 0.2	3–3.2	< 0.12

Information on suppliers

Wish to advertise here?

Physical characteristics

Temperature, °C	$E\cdot 10^{9}$ , $MPa$	$\alpha\cdot 10^{6}$ , $K^{-1}$	$\varkappa$ , $\frac{W}{m\cdot K}$	$\rho$ , $\frac{kg}{m^3}$	$c\cdot 10^{-3}$ , $\frac{J}{kg\cdot K}$
Temperature, °C	$E\cdot 10^{9}$ , $MPa$	$\alpha\cdot 10^{6}$ , $K^{-1}$	$\varkappa$ , $\frac{W}{m\cdot K}$	$\rho$ , $\frac{kg}{m^3}$	$c\cdot 10^{-3}$ , $\frac{J}{kg\cdot K}$
20	130		46	7300
100		10.5			0.525

Mechanical properties at 20 °C

Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	Treatment
Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	Treatment
Casting	GOST 1412-85				300

Brinell hardness number

Rolling	Standard	Classifiers	Value, HBW
Rolling	Standard	Classifiers	Value, HBW
	GOST 1412-85		163–270

Casting and technological parameters

linear shrinkage, %
linear shrinkage, %
1.3

Analogues

Germany	USA
Germany	USA
GG30	No.45

Standards

Standard	Description
Standard	Description
GOST 1412-85

Description of chemical elements

Element	Units of measurement	Description
Element	Units of measurement	Description
Fe	%	Iron
Si	%	Silicon
Mn	%	Manganese
P	%	Phosphorus
C	%	Carbon
S	%	Sulfur

Description of physical characteristics

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$E\cdot 10^{9}$	$MPa$	Elastic modulus
$\alpha\cdot 10^{6}$	$K^{-1}$	Coefficient of thermal (linear) expansion (range 20°C–T)
$\varkappa$	$\frac{W}{m\cdot K}$	Coefficient of thermal conductivity (the heat capacity of the material)
$\rho$	$\frac{kg}{m^3}$	The density of the material
$c\cdot 10^{-3}$	$\frac{J}{kg\cdot K}$	The specific heat of the material (range 20°C–T)

Description of mechanical properties

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$\sigma _{U}$	$MPa$	Ultimate tensile strength

Description of the casting and technological parameters

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
linear shrinkage	%	The difference between model dimensions and the model casting