Sv-08A
Welding cold drawn wire of low carbon steel welding (surfacing), and the manufacture of electrodes
Welding cold drawn wire of low carbon steel welding (surfacing), and the manufacture of electrodes
| Standard | Fe, % | Si, % | Mn, % | Cr, % | Ni, % | Al, % | P, % | C, % | S, % | N, % |
|---|---|---|---|---|---|---|---|---|---|---|
| GOST 2246-70 | 98.82–99.65 | < 0.03 | 0.35–0.6 | < 0.12 | < 0.25 | < 0.01 | < 0.03 | < 0.1 | < 0.03 | < 0.01 |
| Property |
|---|
| Wire rod for the manufacture of welding wire according to TU 14-1-4760-89 Temporary resistance: <420 MPa Relative narrowing:> 60% |
| Wire according to TU U 322-4-392-96 Diameter: 0.8 mm; Temporary resistance: 780 - 1570 MPa |
| Diameter: 1.0 - 1.6 mm; Temporary resistance: 780 - 1470 MPa |
| Diameter: 2mm; Temporary resistance: 780 - 1270 MPa |
| Diameter:> 2 mm; Temporary resistance: 690 - 1030 MPa |
| Wire according to TU 14-15-345-94 Diameter: 0.8 mm; Temporary resistance: 780 - 1570 MPa |
| Diameter: 1.0 - 1.6 mm; Temporary resistance: 780 - 1470 MPa |
| Diameter: 2mm; Temporary resistance: 780 - 1270 MPa |
| Wire according to TU 14-1-953-74 Diameter: 2 mm; Temporary resistance: 784 - 1176 MPa |
| Diameter: 2.5 - 3.0 mm; Temporary resistance: 686 - 1029 MPa |
| Wire according to TU 14-4-863-77 Thickness: 0.8 - 1.4 mm; Temporary resistance: 880 - 1250 MPa |
| Thickness: 1.6 mm; Temporary resistance: 880 - 1180 MPa |
| Thickness: 2 mm; Temporary resistance: 780 - 1080 MPa |
| According to TU 0934-002-55791017-2010 Diameter: 5.5 - 7.0 mm; Temporary resistance: <420 MPa Relative narrowing:> 55% |
| Density: 7.86 g / cm3 |
| Germany | USA |
|---|---|
| 1.0323 (USD7) | K01012 |
| 1.0351 (RRSD10) |