VAL10 (AM4.5Kd)

For heat-resistant high-strength products.

Classification

Country Section Category
CIS, Russia, Ukraine Aluminum, aluminum alloys Foundry aluminum alloys

Chemical composition

Standard Fe, % Si, % Mg, % Mn, % Ti, % Cu, % Zn, % Al, % Cd, %
GOST 1583-93 < 0.15 < 0.1 < 0.05 0.35–0.8 0.15–0.3 4.5–5.1 < 0.1 93.1–94.93 0.07–0.3

Information on suppliers

Physical characteristics

Temperature, °C $$\alpha\cdot 10^{6}$$, $$K^{-1}$$ $$\rho$$, $$\frac{kg}{m^3}$$
20 2800
100 25.1

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ $$\sigma_{Y}$$, $$MPa$$ $$\sigma_{0.5}$$, $$MPa$$ $$KCU\cdot 10^{3}$$, $$\frac{J}{m^2}$$ Treatment
Casting in sandy form 40–430 300–320 4–7 100–130
Casting in chill mold 500 400 4 200

Brinell hardness number

Rolling Standard Classifiers Value, HBW
Casting 70–120

Casting and technological parameters

linear shrinkage, %
1.25

Analogues

USA
201

Standards

Standard Description
GOST 1583-93

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Mg % Magnesium
Mn % Manganese
Ti % Titan
Cu % Copper
Zn % Zinc
Al % Aluminium
Cd % Cadmium

Description of physical characteristics

Parameter Units of measurement Description
$$\alpha\cdot 10^{6}$$ $$K^{-1}$$ Coefficient of thermal (linear) expansion (range 20°C–T)
$$\rho$$ $$\frac{kg}{m^3}$$ The density of the material

Description of mechanical properties

Parameter Units of measurement Description
$$\sigma_{Y}$$ $$MPa$$ Yield strength
$$\sigma_{0.5}$$ $$MPa$$ Tensile stress required to produce a total elongation of 0.5%
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength
$$KCU\cdot 10^{3}$$ $$\frac{J}{m^2}$$ Impact toughness

Description of the casting and technological parameters

Parameter Units of measurement Description
linear shrinkage % The difference between model dimensions and the model casting