Alloy aluminum AL28 (AMg5Mts)
Chemical composition
Al Aluminum Rest Fe Iron <0.25 Si Silicon <0.3 Mg Magnesium 4.8 — 6.3 Mn Manganese 0.4 — 1.0 Cu Copper <0.3 Ni Nickel <0.02 Sn Tin <0.02 Ti Titanium 0.05 — 0.15 Zn Zinc <0.02 Zr Zirconium <0.1 Ot Total impurities <0.4
Casting methods:
Z — sand casting
B — Lost wax casting
K — chill casting
D — injection molding
Analogs in Germany
EN AW-5456 DIN EN 12392: 2016
EN AW-AlMg5Mn1 DIN EN 12392: 2016
EN AW-5456 DIN EN 12392: 2016 / A1: 2019
EN AW-AlMg5Mn1 DIN EN 12392: 2016 / A1: 2019
5456 DIN EN 4632−002: 2008
EN AW-5456 DIN EN 573−3: 2013
EN AW-AlMg5Mn1 DIN EN 573−3: 2013
EN AW-5456A DIN EN 573−3: 2013
EN AW-AlMg5Mn1 (A) DIN EN 573−3: 2013
EN AW-5456B DIN EN 573−3: 2013
EN AW-AlMg5Mn1 (B) DIN EN 573−3: 2013
EN AW-5556A DIN EN 573−3: 2013
EN AW-AlMg5Mn DIN EN 573−3: 2013
Analogs in Russia
AMg5Mts GOST 1583−93
AL28 GOST 1583−93
AL28Z GOST 1583−93
AL28V GOST 1583−93
AL28 GOST 2685−75
AMg5Mts GOST R 55375−12
AL28 GOST R 55375−12
Analogs in the USA
5456A AA
5456B AA
4177 AMS
4182 AMS
4349 AMS
AMS-A-81596 AMS
AMS-QQ-A-200/7 AMS
AMS-QQ-A-250/20 AMS
AMS-QQ-A-250/9 AMS
QQ-A-250/9 AMS
AA5456 ANSI
SB 209 (5456) ASME SB209
SB 221 (5456) ASME SB221
SB 241 (5456) ASME SB241
B 209 (5456) ASTM B209
B 210 (5456) ASTM B210
B 211 (5056) ASTM B211
B 221 (5456) ASTM B221
B 241 (5456) ASTM B241
B 275 (A 95056) ASTM B275
B 275 (A 95456) ASTM B275
B 316 (5056) ASTM B316
B 548 (5456) ASTM B548
B 744 (5456) ASTM B744
B 745 (5456) ASTM B745
F 1667 (5056) ASTM F1667
A95056 UNS
A95456 UNS
C92610 UNS
5056 Included in 7 standards
5456 Included in 8 standards
For the manufacture of shaped castings. Technical requirements GOST 1583−93 Cast aluminum alloys. Technical conditions GOST 2171−90 Parts, products, semi-finished products and billets of non-ferrous metals and alloys. Designation of the brand GOST 2685−75 Cast aluminum alloys. GOST R 55375−12 grades Primary aluminum and alloys based on it. Stamps
Classification
| Country | Section | Category |
|---|---|---|
| CIS, Russia, Ukraine | Aluminum, aluminum alloys | Foundry aluminum alloys |
Chemical composition
| Standard | Fe, % | Si, % | Mg, % | Mn, % | Ti, % | Cu, % | Zr, % | Al, % |
|---|---|---|---|---|---|---|---|---|
| GOST 1583-93 | < 0.5 | < 0.3 | 4.8–6.3 | 0.4–1 | 0.05–0.15 | < 0.3 | < 0.1 | 91.85–94.75 |
Information on suppliers
Mechanical properties at 20 °C
Brinell hardness number
Analogues
| Germany | USA |
|---|---|
| AlMg5 | 5056A |
Standards
| Standard | Description |
|---|---|
| GOST 1583-93 |
Description of chemical elements
| Element | Units of measurement | Description |
|---|---|---|
| Fe | % | Iron |
| Si | % | Silicon |
| Mg | % | Magnesium |
| Mn | % | Manganese |
| Ti | % | Titan |
| Cu | % | Copper |
| Zr | % | Zirconium |
| Al | % | Aluminium |
Description of mechanical properties
| Parameter | Units of measurement | Description |
|---|---|---|
| $$\sigma _{U}$$ | $$MPa$$ | Ultimate tensile strength |
| $$\epsilon_L$$ | % | Elongation at break (longitudinal) |